[pianotech] Gluing Damper Felt

[Terry Farrell]

Keep it simle Steven - just go to Bill's website and order one of each!

Terry Farrell

On Feb 26, 2010, at 11:12 PM, Steven Hopp wrote:

>
>  David
>
> Yes I have it.  As well as several other jigs Bill sells.  They are  
> wonderful.  His bushing cauls are fantastic.  I just bushed a set  
> and did not have to do any easing when I was done.  I did the prep  
> work and the final result was perfect.  I look forward to adding  
> more from his line.  Probably the hammer and shank clamps and the  
> soundboard repair stuff.  We will see.
>
> G'nite,
>
> Steven Hopp
> From: davidlovepianos at comcast.net
> To: pianotech at ptg.org
> Date: Fri, 26 Feb 2010 20:04:51 -0800
> Subject: Re: [pianotech] Gluing Damper Felt
>
> If you don’t have it already check out the damper regulating  
> platform that Bill Spurlock sells  http://www.spurlocktools.com/id61.htm
>
>
> David Love
> www.davidlovepianos.com
>
> From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org]  
> On Behalf Of Steven Hopp
> Sent: Friday, February 26, 2010 7:55 PM
> To: pianotech at ptg.org
> Subject: Re: [pianotech] Gluing Damper Felt
>
> Thanks David and all,
>
> That is what I am going to do.  Following your advice and Susan's  
> PTG Tech article should make it easier.  Not starting till next week.
>
> Steven Hopp
>
> From: davidlovepianos at comcast.net
> To: pianotech at ptg.org
> Date: Fri, 26 Feb 2010 19:38:28 -0800
> Subject: Re: [pianotech] Gluing Damper Felt
>
> Always in the piano with a  platform to regulate the lever height as  
> I go.  Fewer shut off problems, it doubles for getting the timing  
> right at installation and you can determine how much you need to  
> trim the trichords right there.
>
> David Love
> www.davidlovepianos.com
>
> I'm wondering how many of you glue new damper felt on old heads and  
> wires with dampers in the piano and/or out?  I have a set to do on a  
> newly strung piano and this is the first set I am attempting.  I  
> have Susan Grahms articles from the PTG technical prep manual and  
> her method and I have a method and suggestion from a colleague who  
> suggests something different.
>
> Thoughts?  Suggestions?
>
> Steven Hopp
> Midland, TX
>
> Hotmail: Free, trusted and rich email service. Get it now.
>
>
> Hotmail: Free, trusted and rich email service. Get it now.
>
> Hotmail: Powerful Free email with security by Microsoft. Get it now.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100227/a38b8638/attachment.htm>