[pianotech] finishing a plate

[David Ilvedson]

If the fingers are getting gouged on the sharp keysticks, you should sand the edges...

David Ilvedson, RPT
Pacifica, CA  94044

----- Original message ----------------------------------------
From: "Joseph Garrett" <joegarrett at earthlink.net>
To: pianotech at ptg.org
Received: 2/25/2010 8:19:45 AM
Subject: Re: [pianotech] finishing a plate


>Ooops! Forgot to say that I use Mohawk Black touch up pens for the lettering. I also 
>use that for covering the finger gouges on sharp keysticks. It's an easy applicator 
>thingee.<G>
>Joe


>Joe Garrett, R.P.T. (Oregon)
>Captain, Tool Police
>Squares R I