[pianotech] Kimball Console Hammer Return Spring Size

[Dean May]

Have you tried bending them to reduce the tension? 

 

Dean

Dean W May                (812) 235-5272

PianoRebuilders.com    (888) DEAN-MAY

Terre Haute IN 47802

  _____  

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Garret Traylor
Sent: Monday, February 22, 2010 2:04 PM
To: pianotech at ptg.org
Subject: [pianotech] Kimball Console Hammer Return Spring Size

 

Can someone tell me the proper hammer return spring size diameter for a
Kimball console.  I have an instrument in my store that has had the springs
replaced but they are way too strong and will need to be down sized.

Kindest Regards,

Garret 

---

Garret Traylor - President

High Point Piano & Music Inc.

88-PIANO (336) 887-4266

P Go Green! Print this email only when necessary. Thank you for helping High
Point Music be environmentally responsible.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100222/a6da545f/attachment-0001.htm>