[pianotech] Hammer strike line. Was-----Yamaha Hammer Suggestion

Paul T Williams pwilliams4 at unlnotes.unl.edu
Mon Feb 8 06:51:53 MST 2010


We learned this at Oberlin 2 years ago for the Steinway seminar.  I was 
amazed how much better it sounded.

Paul




From:
erwinspiano at aol.com
To:
pianotech at ptg.org
Date:
02/07/2010 03:39 PM
Subject:
Re: [pianotech] Hammer strike line. Was-----Yamaha Hammer Suggestion



 Randy /Tom
 You mean like this S & S Model B? 95 % of our steinway hammer lines look 
sometyhing like this. They arne't the only ones that benefit
  Dale Erwin

 

Randy 
With regards to the "sweet spot" it's a matter of experimenting with 
several guide hammers with only a dry fit to the shank. Play around with 
the action by sliding it in and out ever so slightly. It's rather obvious 
when you've arrived at the sweet point as the tone will spike once the 
true spot is found. 
I find that about 90% of the pianos you are safe with a straight hammer 
strike line from 1-88. That's how most factory jobs are completed. However 
I find that the older Steinways can benefit from a varied line from #70 
and up. You just need to experiment and find the general parameters and 
off you go. 
 
Tom Servinsky 
 
----- Original Message ----- From: "Randy Chastain" <
Randy_Chastain at sbcglobal.net> 
To: <pianotech at ptg.org> 
Sent: Friday, February 05, 2010 12:58 PM 
Subject: Re: [pianotech] Yamaha Hammer Suggestion 
 
Tom, 
I like your two cents and from having almost completed today a hammer job 
for a Steinway L with Steinway hammers (request of owner) , thank you for 
bringing up part of the detailed process and skill it takes to do a good 
and proper job. The attention to detail can be overlooked for sure by some 
and end up with a bigger problem. The hard work starts at the beginning no 
matter who you get your parts from. Its the detailed work that pays off. I 
still hear of techs who buy, for example pre hung Steinway hammers :( . I 
did that once early on and, oh my gosh!!!Never, never again. 
 
I would be very interested in how you or anybody else find the proper 
hammer line/sweet spot. I can ALWAYS learn something. I have one of those 
diseases that I have to keep learning. There's just so much out there that 
I can't help myself. I live in the San Francisco bay area and I wish there 
was a better way for me to continue to learn after 15 years of this. I 
have it. 
 
Randy Chastain 
 
 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100208/0be0f8dd/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 81333 bytes
Desc: not available
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100208/0be0f8dd/attachment-0001.jpeg>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC