I think you are more likely to be more OK with a Yamaha...Kawai, than a US Steinway. David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Paul T Williams" <pwilliams4 at unlnotes.unl.edu> To: pianotech at ptg.org Received: 2/5/2010 10:56:42 AM Subject: Re: [pianotech] Yamaha Hammer Suggestion >Randy, >I've never tried the pre-hung Steinway hammers, but have thought about >doing it as I have time crunches with certain classroom or professor >studios here at Univ of NE. What goes wrong with them? I'm curious. I've >never heard a negative comment about them, nor do I know anyone that has >ordered them, personally. Has anyone else out there ordered pre-hung? >Best, >Paul >From: >Randy Chastain <Randy_Chastain at sbcglobal.net> >To: >pianotech at ptg.org >Date: >02/05/2010 11:59 AM >Subject: >Re: [pianotech] Yamaha Hammer Suggestion >Tom, >I like your two cents and from having almost completed today a hammer job >for a Steinway L with Steinway hammers (request of owner) , thank you for >bringing up part of the detailed process and skill it takes to do a good >and proper job. The attention to detail can be overlooked for sure by >some and end up with a bigger problem. The hard work starts at the >beginning no matter who you get your parts from. Its the detailed work >that pays off. I still hear of techs who buy, for example pre hung >Steinway hammers :( . I did that once early on and, oh my gosh!!!Never, >never again. >I would be very interested in how you or anybody else find the proper >hammer line/sweet spot. I can ALWAYS learn something. I have one of those >diseases that I have to keep learning. There's just so much out there that >I can't help myself. I live in the San Francisco bay area and I wish there >was a better way for me to continue to learn after 15 years of this. I >have it. >Randy Chastain >On Feb 5, 2010, at 2:26 AM, Tom Servinsky wrote: >> Steven >> I'll throw my 2 cents in on this one. >> Truth be told, there are many types of hammers that could work for this >piano. With good voicing techniques and a good understanding how many >different types of hammers respond, one can get the sound of the piano to >be clear and full bodied. That being said, it's all a matter of how much >time and effort you want to make. >> Although I have my go-to hammers I prefer, I finding more and more it's >more of doing an exquisite hanging job that makes for a nice sounding C7. >Taking the time to make sure that the traveling is dead-on, and your >hammer strike line reflects that of the sweet spots of the piano will lay >the grounds for a nice voicing experience. It's when the strike line is >not in check with the piano that we end treating the symptoms and not the >disease. I've seen countless techs spending too much time trying to >overcome the problems of a bad strike line or poor traveling. >> Tom Servinsky >> ----- Original Message ----- From: "David Ilvedson" ><ilvey at sbcglobal.net> >> To: <pianotech at ptg.org> >> Sent: Friday, February 05, 2010 12:12 AM >> Subject: Re: [pianotech] Yamaha Hammer Suggestion >> >> >>> No offense to anyone in particular...OK?...but this idea that any piano >hammer can be hung and sounds great right off the bat...well, I've got a >problem with that. I think we need a little more education in voicing... >>> >>> David Ilvedson, RPT >>> Pacifica, CA 94044 >>> >>> ----- Original message ---------------------------------------- >>> From: "John Dever" <jazzman3743 at live.com> >>> To: pianotech at ptg.org >>> Received: 2/4/2010 4:13:11 PM >>> Subject: Re: [pianotech] Yamaha Hammer Suggestion >>> >>> >>> >>>> Ari Isaac Cadenza "S" Hammers. >>> >>>> I just had a set installed on my Petrof >>> >>>> Nice right out of the box. >>> >>>> JD >>>> >>> >>> >>>> From: hoppsmusic at hotmail.com >>>> To: pianotech at ptg.org >>>> Date: Thu, 4 Feb 2010 02:49:37 +0000 >>>> Subject: [pianotech] Yamaha Hammer Suggestion >>> >>> >>> >>>> Hello List, >>>> >>>> I am looking for a suggestion of new hammers for a Yamaha C7. It will >be used in a >>>> small hall (seating less than 300). The preference would be for as >full and rich a >>>> sound as possible with a crisp high treble. I would hope for hammers >that would not >>>> need extensive voicing immediately. >>>> >>>> Has anyone replaced hammers and have any experience or suggestions? >>>> >>>> Thanks, >>>> >>>> Steven Hopp >>>> Midland, TX >>> >>> >>> >>>> Hotmail: Trusted email with powerful SPAM protection. Sign up now. >>>> >>>> >_________________________________________________________________ >>>> Hotmail: Trusted email with powerful SPAM protection. >>>> http://clk.atdmt.com/GBL/go/201469227/direct/01/ >>
This PTG archive page provided courtesy of Moy Piano Service, LLC