[pianotech] Yamaha Hammer Suggestion

[Tom Servinsky]

Steven
I'll throw my 2 cents in on this one.
Truth be  told, there are many types of hammers that could work for this 
piano. With good voicing techniques and a good understanding how many 
different types of hammers respond, one can get the sound of the piano to be 
clear and full bodied. That being said, it's all  a matter of how much time 
and effort you want to make.
Although I  have my go-to hammers I prefer, I finding more and more it's 
more of doing an exquisite hanging job that makes for a nice sounding C7. 
Taking the time to make sure that the traveling is dead-on, and your hammer 
strike line reflects that of the sweet spots of the piano will lay the 
grounds for a nice voicing experience. It's when the strike line is not in 
check with the piano that we end treating the symptoms and not the disease. 
I've seen countless techs spending too much time trying to overcome the 
problems of a bad strike line or poor traveling.
Tom Servinsky
----- Original Message ----- 
From: "David Ilvedson" <ilvey at sbcglobal.net>
To: <pianotech at ptg.org>
Sent: Friday, February 05, 2010 12:12 AM
Subject: Re: [pianotech] Yamaha Hammer Suggestion


> No offense to anyone in particular...OK?...but this idea that any piano 
> hammer can be hung and sounds great right off the bat...well, I've got a 
> problem with that.   I think we need a little more education in voicing...
>
> David Ilvedson, RPT
> Pacifica, CA  94044
>
> ----- Original message ----------------------------------------
> From: "John Dever" <jazzman3743 at live.com>
> To: pianotech at ptg.org
> Received: 2/4/2010 4:13:11 PM
> Subject: Re: [pianotech] Yamaha Hammer Suggestion
>
>
>
>>Ari Isaac Cadenza "S" Hammers.
>
>>I just had a set installed on my Petrof
>
>>Nice right out of the box.
>
>>JD
>>
>
>
>>From: hoppsmusic at hotmail.com
>>To: pianotech at ptg.org
>>Date: Thu, 4 Feb 2010 02:49:37 +0000
>>Subject: [pianotech] Yamaha Hammer Suggestion
>
>
>
>>Hello List,
>>
>>I am looking for a suggestion of new hammers for a Yamaha C7.  It will be 
>>used in a
>>small hall (seating less than 300).  The preference would be for as full 
>>and rich a
>>sound as possible with a crisp high treble.  I would hope for hammers that 
>>would not
>>need extensive voicing immediately.
>>
>>Has anyone replaced hammers and have any experience or suggestions?
>>
>>Thanks,
>>
>>Steven Hopp
>>Midland, TX
>
>
>
>>Hotmail: Trusted email with powerful SPAM protection. Sign up now.
>>
>>_________________________________________________________________
>>Hotmail: Trusted email with powerful SPAM protection.
>>http://clk.atdmt.com/GBL/go/201469227/direct/01/