Now I am confused. According to Terry(did I get it right) a spinet grand have the tuning pins along the front of the plate but this piano the tuning pins are at the back of the plate. On my next visit hopefully I can take more photos. Thanks all Lim Sent from my BlackBerry Wireless Handheld Powered by Gee! from StarHub -----Original Message----- From: "Joseph Garrett" <joegarrett at earthlink.net> Sender: pianotech-bounces at ptg.org Date: Fri, 27 Aug 2010 07:55:40 To: pianotech<pianotech at ptg.org> Reply-To: joegarrett at earthlink.net, pianotech at ptg.org Subject: [pianotech] Spinet Grand or Square Grand? All, With close scrutiny of the action, (of Lim's photos " Square Grand?"), Jack is right! It is a Spinet Grand and not A Square Grand. Although, both were made by the same company, the difference is in the fact that the Spinet Grand is smaller than a Square Grand ...And, the action has a modern wippen in it, for the Spinet grand. If we would have seen a side view of the action, we would have had less confusion. The Spinet Grand has a much more balanced tone, from end to end. (still not even close to ideal tho<G>) As for the stature criteria for Lim, it would still be a bit hard on the back, but doable. Terry, you, too, were correct! <G> I was not. Regards, Joe Joe Garrett, R.P.T. (Oregon) Captain, Tool Police Squares R I -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100828/222beee5/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC