William, Have you found that it's possible to get CA into a pinblock with plate bushings without tilting? Thanks, Zeno Wood ---------------------------- I'm with Tom. CA will "wick in" to the wood itself easily. Getting into the seam between the Tuning Pin and Pin Block is child's play. Treat it now, see how it holds, and perhaps do it again in a few months. Use a thin hypo and if it's an upright, don't bother tipping. It gets in easily enough, and I find that this method keeps you from applying too much CA. Stop applying before it starts running down the plate. ;-] William R. Monroe -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100824/01953220/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC