>You can also change the pitch of individual bars by heating and >applying solder to the end of a rod, then carefully file off the >solder until the proper pitch is achieved. It does sound like a >Schoenhut system, and they will sell you the correct set of tone >bars. They're not expensive and will save you a lot of work. They >will need tuning however. > Mike Kurta Judging by some of those videos, the tuning is usually considered optional, IMO. Susan Kline -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100815/9e108bd3/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC