> Thanks Ken for the reply. Wesley Hardman Take the one off in the picture you attached and find a good woodworking > shop and have it duplicated - probably cost you a couple hundred dollars. > Or continue to check with piano dealers that traded in a Kimball that they > are not going to sell and see if you can find a leg. > > Ken Gerler > > > ----- Original Message ----- > From: "Wesley Hardman" <whardman at scottsboro.org> > To: <pianotech at ptg.org> > Sent: Saturday, July 31, 2010 11:25 AM > Subject: [pianotech] Fw: > > >> Does anyone know where one might obtain a leg like the one shown in the >> photo for a Kimball spinet? >> >> Thanks, >> >> Wesley Hardman >> Scottsboro, Alabama >> ----- Original Message ----- >> From: <2565749899 at vzwpix.com> >> To: <whardman at scottsboro.org> >> Sent: Saturday, July 31, 2010 8:11 AM >> >> >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 9.0.851 / Virus Database: 271.1.1/3041 - Release Date: 07/31/10 >> 01:34:00 >> > >
This PTG archive page provided courtesy of Moy Piano Service, LLC