Whereas I am not familiar with installation of the Kawai or Yamaha mechanism, Jurgen's unit does require some chiseling/routing out of the fallboard and case side. So you've gotta shape/cut a couple of recesses - isn't that why we are professionals? It's not rocket science...... Terry Farrell On Apr 27, 2010, at 12:06 AM, tnrwim at aol.com wrote: > > I tuned a Yamaha C2 a couple of weeks ago that had the slow drop > fallboard. Maybe Yamaha might have one they'd sell? > > > Rob McCall > I think what Don was trying to say that the mechanism isn't as much > of the problem as is the woodworking required to install them. At > the factory they use a computerized machine to cut out the fall > board and the rim. In other words, Yamaha's mechanism might have the > same problem. > > Wim -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100427/8eb621f4/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC