My 2 sided Jensen bag with 4 pallets weighs 17 lbs loaded with tools. I'm very careful about what goes in the primary bag and what stays in the backup bags in the car. David Weiss -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of David Ilvedson Sent: Thursday, April 15, 2010 8:15 PM To: pianotech at ptg.org Subject: Re: [pianotech] tool cases What does it weigh with tools? What are you lugging around? David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "David Weiss" <davidweiss at embarqmail.com> To: pianotech at ptg.org Received: 4/15/2010 3:58:51 PM Subject: Re: [pianotech] tool cases >Hi William, > >I use a Jensen tool case from Stanley and like it a lot. It is very >professional looking and durable. I like that they make many different >styles pallets, so you can customize them to your liking. I have the 2 >sided case, which holds 4 pallets. > >David Weiss > >From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf >Of William Monroe >Sent: Thursday, April 15, 2010 1:57 PM >To: pianotech at ptg.org >Subject: [pianotech] tool cases > >OK folks, I'm looking for a new case, and I have something specific in mind, >just wondering if anyone has seen what I'm looking for. The case I want is >the following: >http://www.stanleysupplyservices.com/product-group.aspx?id=10158 ><http://www.stanleysupplyservices.com/product-group.aspx?id=10158&pn=216-1 >70 >> &pn=216-170 >It's similar to some of the rolling cases I've seen readily available except >it has the larger cargo section in the middle. That combination of pallets >on the outside and cargo in the middle is very appealing to me. Now, here's >the rub: I really would like THAT case with wheels. Anyone seen anything >like it? >-- >William R. Monroe
This PTG archive page provided courtesy of Moy Piano Service, LLC