Lookin' good! Let us know how it shakes out.... Terry Farrell On Apr 7, 2010, at 12:56 AM, Duane McGuire wrote: > Well the die is cast. I went for resawing and a new glue-up of the > pinblock. I sliced the multi-lam down the middle and faced the top > with delignit. > > I glued up with urea-formaldehyde resin and clamped the three piece > sandwich to my flat assembly table. > > Hopefully tomorrow, I'll be looking at a block that's easier to work > with. I'm understanding what folks have said about clamping and > screwing to the plate, but I got intrigued with straightening it > out. Hope it works! > > Thanks again for your thoughts and encouragement. > > -Duane McGuire > <pinblockGlueup.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC