Hey Will, How are you going to notch this baby? Are you setting yourself up with a power notcher? Jim I William Truitt wrote: > Thank you, good sir. > > Will > > -----Original Message----- > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf > Of Ron Nossaman > Sent: Tuesday, April 06, 2010 8:09 PM > To: pianotech at ptg.org > Subject: Re: [pianotech] Pitch change, etc. > > William Truitt wrote: > >> Thanks Ron for the referral, and others who have commented. What are you >> using for an epoxy, and how much do you thin it to get the saturation? >> > > Regular old West System, with a little high density filler to > keep it from all running out onto the floor. It soaks clear > through that thin veneer, no problem. Oh, and the veneer, it > doesn't matter a bit if it's quarter or flat cut. There's more > of the flat cut, and you have more choices. > Ron N > > > > -- Jim Ialeggio grandpianosolutions.com 978- 425-9026 Shirley, MA
This PTG archive page provided courtesy of Moy Piano Service, LLC