Chuck said: "Joe - What about measuring from a straight edge placed across one side of the rim of the piano to the other. Do you think that would provide a reliable reference point? It seems as if it would be easier to measure down from a straight edge to the top of the soundboard, than up from the floor to the underside of the soundboard. You could use a steel ruler. Just a thought." Chuck, Nope. You are forgetting: EVERYTHING is moving.<G> I'm not advocating measuring from above or below. Whatever, gets the job done. (Get Er Dun!)<G> joe Joe Garrett, R.P.T. (Oregon) Captain, Tool Police Squares R I -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100406/5f8efbae/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC