Hi Terry: Is that foam pipe insulation on the top of the rim to protect it? Pretty cool idea!! Oh yeah, the piano looks pretty nice too! Will From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Terry Farrell Sent: Thursday, April 01, 2010 3:48 PM To: pianotech at ptg.org Subject: Re: [pianotech] pin block inserts I forgot to add. I like how the dark panel in the cutoff turned out. The case is veneered in some very nice "flamed" mahogany. I found some veneers very similar and veneered a piece of plywood for the insert. Stained it to match the case. I really like working with the panel with the cut-out part cut off. On this soundboard I even cut the fish extra off. Just more compact - easier to rib, etc. - and easier to glue - I can put some nice C-clamps on the cutoff/panel joint. Here's how it looks strung. I guess you could try something different each time till you find a combo you like! Terry Farrell On Apr 1, 2010, at 9:27 AM, David Love wrote: Terry: Which piano is that? I like that look in the bass corner. David Love www.davidlovepianos.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100405/25b373ef/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 679338 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100405/25b373ef/attachment-0001.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC