To maintain let off with the button situated lower, you need to either bolster the knuckle or reduce the height of the jack tender. To keep the drop screw from bottoming out, bolster the knuckle or lower the cushion on the end of the rep lever. If the knuckles are not flat and bolstering is not possible then the other remedies are needed. Attached photo shows alterations. -- Regards, Jon Page -------------- next part -------------- A non-text attachment was scrubbed... Name: wip3web.jpg Type: application/octet-stream Size: 68478 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100403/69247532/attachment-0001.obj>
This PTG archive page provided courtesy of Moy Piano Service, LLC