Bell's are usually very nice pianos. I'm working on one right now. It's has the Illimitable Repeating Action. I've attached a picture of the jack with a slot in it. It's a real pain to repair but it does repeat much faster. Marc Lanthier -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of John Ross Sent: September-13-09 9:51 PM To: pianotech at ptg.org Subject: Re: [pianotech] [Files] Bell upright piano. ("The iron Giant" !) That might have been called an accelerated action. A pain when the cord breaks, but worth the proper fix. I have seen one, where all the springs were clipped. It still worked, but not as well. John Ross Windsor, Nova Scotia ----- Original Message ----- From: "tom" <tomtuner at verizon.net> To: <pianotech at ptg.org> Sent: Sunday, September 13, 2009 8:57 PM Subject: Re: [pianotech] [Files] Bell upright piano. ("The iron Giant" !) List, I slapped a quick tuning on this today. Very nice piano. Has a mix of copper and iron wrapped bass strings so it's pretty tubby but very solid otherwise. If there was a buck in it or was owned by a devoted client this would be a great rebuilding project. It's not unlike the occasional Vose or Ivers and Pond upright that we see up here in Massachusetts that has somehow survived our climate in tact. One feature I did not notice until today. The jack has a hole in which a silk cord that is attached to the hammer flange engages a jack mounted spring. Clear as mud right? I'll try and get a picture.This seems to duplicate or perhaps augment the jack springs job. Tom D. -------------- next part -------------- A non-text attachment was scrubbed... Name: 100_2232.JPG Type: image/jpeg Size: 440320 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090914/f2955706/attachment-0001.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC