Right, because there would be lost motion with the soft pedal stuck in the "up" position. -- JF On Sat, Sep 12, 2009 at 8:28 AM, Terry Farrell <mfarrel2 at tampabay.rr.com> wrote: > No. The rest rail is in it's proper position - if the hammer shanks were > resting on the rail, the blow would be about right. The hammer shanks are > all off the rail and blow is short. Soft pedal is fine. > Terry Farrell > On Sep 12, 2009, at 9:04 AM, dbpowell1 at juno.com wrote: > > Could it be the soft pedal is either not in its right place or adjusted so > high that it pushes up on the rest rail. Its happened to me before.
This PTG archive page provided courtesy of Moy Piano Service, LLC