There are some 86 foam products on their site. Which one specifically are you using (and thanks for the tip!). David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Tom Servinsky Sent: Wednesday, September 09, 2009 2:50 AM To: pianotech at ptg.org Subject: Re: [pianotech] Baffles Go to Markertek where you can by it in the bulk 3'x5' size. Size and cut it yourself. Comes in 2 thickness- 2 1/2" or 3 1/2". The material is called acoustical baffle foam. One 3x5 panel will yield enough for 2 pianos and cost a fraction of what Edwards sells them for. www.markertek.com Tom Servinsky ----- Original Message ----- From: "David Doremus" <algiers_piano at bellsouth.net> To: <pianotech at ptg.org> Sent: Tuesday, September 08, 2009 11:12 PM Subject: Re: [pianotech] Baffles > David Love wrote: >> >> Who makes those foam baffles that fit in the spaces between the bracing >> underneath the piano to dampen the sound-can't remember? Do they work? >> >> David Love >> >> www.davidlovepianos.com >> > http://www.edwardsstringcovers.com/ > > Yes, to some extent. You can do it yourself for a little bit of trouble > making a pattern but they do a good job. > > > --Dave > New Orleans
This PTG archive page provided courtesy of Moy Piano Service, LLC