>I also shortened the foam collar and angled it 45 degrees >at the front edge so as not to place pressure on the tragus. >This reduced the circumference of the foam mount slightly >and let the foam conform more to the ear structure. Correction, I didn't shorten the foam collar. I shortened and angled the collar mount so the foam could compress a little more thus reducing some pressure inwards and on the frond side. Attached is a photo of the modification alongside the OEM ver. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090908/9f071d3d/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: sensgard mod.jpg Type: application/octet-stream Size: 38208 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090908/9f071d3d/attachment-0001.obj>
This PTG archive page provided courtesy of Moy Piano Service, LLC