Thanks. I've done the job several times but not on a Wurlitzer. I see newer ones so rarely that I didn't know they were built by YC. David Love www.davidlovepianos.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Bruce Dornfeld Sent: Wednesday, September 02, 2009 5:15 PM To: pianotech Subject: Re: [pianotech] wurlitzer with action bracket problem Hello David. Wurlitzer models starting with the letter G are built by Young Chang. I cannot find serial number/date of manufacturing info. There are very few other problems that will cause hammers to block on a newer piano, so this probably has the action bracket problem. If you measure the action spread, you can confirm this. The Journal article on this is only a month old; it is in the August, 2009 Journal. It really is a fun little job. Enjoy! Bruce Dornfeld, RPT bdornfeld at earthlink.net North Shore Chapter -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090902/433704a9/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC