PAULREVENKOJONES at aol.com wrote: > > > In a message dated 5/27/2009 9:16:26 A.M. Central Daylight Time, > nelsong at intune88.com writes: > > Altering back scale bearing is done by moving the alaquots? > > Altering back scale bearing is done depending on the system. Bearing can > be changed simply by adding or subtracting felt on the bearing bar in > lesser pianos. Moving the aliquots toward the bridge increases bearing > and the reverse decreases bearing. Grinding off aliquots to alter > bearing is possible. Building up aliquots is also possible. Lots of ways > to work with the back bearing. > > Paul All of which also changes net bearing. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC