On the Kawai consoles and studios, (at least on the newer ones) the screws are located under the key bed. NOT where they are normally located on most keyslips. You take them out and then they keyslip will slide forward towards you. From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Matthew Todd Sent: Wednesday, May 13, 2009 5:23 PM To: pianotech at ptg.org Subject: Re: [pianotech] Cheek Block removal question... I have had a similar issue with the keyslip of a Kawai console. Ideas anyone? TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com <http://www.toddpianoworks.com/> --- On Wed, 5/13/09, Larry Trischetta <ltpianoman at comcast.net> wrote: From: Larry Trischetta <ltpianoman at comcast.net> Subject: [pianotech] Cheek Block removal question... To: pianotech at ptg.org Date: Wednesday, May 13, 2009, 9:07 PM Hi...I'm trying to find out how to remove the cheek blocks (for action removal) on a 1986 Story & Clark baby grand ser.# 901037. There are no screws underneath and nothing under the rubber button on the cheek block. Also, there are no screws under the key slip. Maybe I need new glasses. Thanks for any help offered. Larry Trischetta, Pocono NE Chapter _____ avast! Antivirus <http://www.avast.com> : Outbound message clean. Virus Database (VPS): 090513-0, 05/13/2009 Tested on: 5/13/2009 11:03:29 PM avast! - copyright (c) 1988-2009 ALWIL Software. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090513/5832f9d6/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC