[pianotech] agraffe leveling

[Joe And Penny Goss]

agraffe leveling
Hi Scott,
Could have someone trimmed these dampers to eliminate whoosh?
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Scott Jackson 
  To: David Ilvedson ; pianotech at ptg.org 
  Sent: Friday, March 27, 2009 2:33 PM
  Subject: Re: [pianotech] agraffe leveling


  I have a Samick like that. I have never gotten the bi-chords properly leveled. So just how much angle can you put on a hammer face without upsetting something else? 

  Scott Jackson

    ----- Original Message ----- 
    From: David Ilvedson 
    To: caut at ptg.org ; pianotech at ptg.org 
    Sent: Friday, March 27, 2009 3:05 AM
    Subject: [pianotech] agraffe leveling


    I was attempting to level the strings on a newer Yam C6 the other day.   According to Goss's leveling device, all the tenor agraffes were way off.   I tried pulling up the left string to level but couldn't make enough of a difference.   A bad batch of agraffe drilling?   I guess in this situation you have to fit the hammer to what you've got?

    David Ilvedson, RPT
    Pacifica, CA 94044
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090327/15b88998/attachment.html>