Hmmmmm. And I'm certain that S&S would be more than happy to help a rebuilder rebuild one of their pianos. Maybe he should contact the S&S rebuilding department directly...... ;-) Maybe worth a try, but I sure wouldn't hold my breath. Terry Farrell ----- Original Message ----- > On 3/12/09, jim ialeggio <jimialeggio at gmail.com> wrote: >> I have an S&S "A" action key and action reprortion project (aka Bruce >> Clark's protocol) for which I'm replacing beat whippen and hammer rails. >> It >> would certainly save time and $ to order pre-bored rails from Steinway. >> My >> sense though is that I will be sorry for that, as the bore locations of >> contemporary manufacture will most likely not match 1890 locations. >> >> Any experience on this? Is is possible the bore locations would be >> remotely >> acceptable? > > I would think that Steinway has scale sticks for every model/scale > they ever produced and could produce what you need from them. Have you > asked? > > > -- > Conrad Hoffsommer, RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC