>To my utter surprise the bottom (supposedly flat) piece of the jig >was slightly warped, >causing the whole jig to lean toward the action, Another reason to use the TautLine Regulation Guide (TLRG) from Pianotek. Now you know to check the hammer height from the key bed and not from a jig. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090725/7477cc09/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC