Please elaborate your thoughts on this as it is a popular trend now to relocate the axis of the tray pivot to match the damper lever center pin. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of donmannino at ca.rr.com Sent: Tuesday, July 21, 2009 11:24 AM To: pianotech at ptg.org Subject: Re: [pianotech] damper tray support If you are referring to the damper lever center pins axis being different than the tray pivot axis, then there are good reasons to keep these two separated. Don Mannino
This PTG archive page provided courtesy of Moy Piano Service, LLC