Tom Unless there is an allen screw inside that hole, it looks like the only way to get the dampers off is to cut the felt off the block. You might need to remove the?damper lever to do that. Willem (Wim) Blees, RPT Piano Tuner/Technician Mililani, Oahu, HI 808-349-2943 Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: tcc440 at netscape.net To: pianotech at ptg.org Sent: Mon, Jul 20, 2009 2:52 pm Subject: [pianotech] Gray Dampers Does anyone have a clue as how to remove and?re-install?these type of damper heads from damper wires??? I have found these on Yamaha "grays". I have never had the need to do any work other than a little wire or spoon bending but..... ya never know ???? Tom Cobble? RPT? Melbourne, Florida A Good Credit Score is 700 or Above. See yours in just 2 easy steps! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090720/1daafc54/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC