Thanks, Jerry. Mine are straight. will From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jerry Cohen Sent: Wednesday, January 28, 2009 9:22 AM To: pianotech at ptg.org Subject: Re: [pianotech] Young Chang Growing Brackets Will, One other indication for the correct action spread (112.5 vs. 113.5mm). If the let off dowels are angled it is pre 1992 (112.5). If the dowels are at 90 degrees it is post 1992 (113.5). Since yours is neither pre nor post 1992 perhaps this information will help. Jerry Cohen, RPT NJ Chapter _____ From: Will Truitt <surfdog at metrocast.net> To: pianotech at ptg.org Sent: Wednesday, January 28, 2009 5:32:19 AM Subject: Re: [pianotech] Young Chang Growing Brackets The only question for me is which of the two values given by YC it should be. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090128/09c63c24/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC