Rick, If it is two polyester surfaces, then just insulate them from each other by any practical means. Felt, leather, cardboard or even grease will work. Try putting - lyre squeak polyester site:ptg.org - into the google search box, but don't click the article name, instead click on 'Cached' at the end of each listing. Google still has a copy of a lot of the archives. Scott Jackson -----Original Message----- List, I've read posts regarding this problem, but can't get access to archives to look up remedy. I think it had something with the poly finish rubbing against each other. Was drilling very small holes and applying ca glue involved in some way? Thanks, Rick Ucci/Ucci Piano -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090105/d533b8cc/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC