In addition to adding blocks under the caster, be sure to make a platform for under the pedals. Willem (Wim) Blees, RPT Piano Tuner/Technician Mililani, Oahu, HI 808-349-2943 Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: Jack Houweling <jackhouweling at dccnet.com> To: Pianotech List <pianotech at ptg.org> Sent: Thu, 26 Feb 2009 7:26 pm Subject: [pianotech] Raising a piano I have a?customer who is very tall and would like me to raise her grand piano?four inches higher off the ground. Has anyone done this before or are there any suggestions? ? I was thinking about using some 4x4 blocks and using a boringbit to drill a cup for the wheels. ? ? Regards, Jack Houweling??? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090227/427c7403/attachment-0001.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC