this was supposed to have a picture attached - Or you could pour it off into squeeze bottles.. David Ilvedson wrote: > The pump seems logical. Otherwise you have to use a spoon or something to get it onto the scale. Which then is thrown away...I haven't used the West stuff yet... > > David Ilvedson, RPT > Pacifica, CA 94044 > > ----- Original message ---------------------------------------- > From: Farrell <mfarrel2 at tampabay.rr.com> > To: <pianotech at ptg.org> > Received: 2/26/2009 5:06:20 PM > Subject: Re: [pianotech] Bass Top Bridge > > > >> I agree with you completely Mike regarding weighing the ratio of resin & >> hardener - only way to do it accurately. However, the pumps only cost a few >> bucks and they make dispensing the stuff a whole lot easier - super easy to >> drip out less than a half-gram liquid at a time - the controlled dispensing >> makes the weighing process very easy and accurate. >> > > >> My 2 cents worth. >> > > >> Terry Farrell >> > > >> ----- Original Message ----- >> From: "Mike Spalding" >> >>> One more thing - Don't buy the pumps, spend the money instead on a small >>> digital scale so you can mix by weight. It's much more accurate, and you >>> can make really small batches. >>> Mike >>> > > > > -------------- next part -------------- A non-text attachment was scrubbed... Name: J Teply Pinblock 008.jpg Type: image/jpeg Size: 36966 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090226/d87c401e/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC