I know Jurgen at http://www.pianofortesupply.com/tools1.html sells narrow, flexible regulating tools. Paul Bruesch Stillwater, MN On Wed, Feb 25, 2009 at 6:20 PM, <KeyKat88 at aol.com> wrote: > Greetings, > > Going to make the adjustment of jack to knuckle, I find the > neck/shank of the screw adjustor tool, too big in diameter to fit between > the let-off buttons. The let-off buttons on this Young Chang grand are the > dowel type. I've tried slipping the tool's shank from the bottom > up, in-between the let-off dowels, but geesh, there's just no room! Is > there a better tool for this? If so, who sells it? > > Julia Gottshall > Reading, PA > > ------------------------------ > Get a jump start on your taxes. Find a tax professional in your > neighborhood today<http://yellowpages.aol.com/search?query=Tax+Return+Preparation+%26+Filing&ncid=emlcntusyelp00000004> > . > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090225/c2cf6ff4/attachment-0001.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC