>I clamp a vice grip at the top of the old elbow top on the wire... Cut the old elbow off with diagonal cutters or such. >...Screw it up until it bumps the vice grip and it >will be close to the same level, if they are about the same. Consider the length of the threaded section on the new elbow compared to the old. Getting the overall length about the same saves time with lost motion adjustment. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090204/1712e913/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC