[pianotech] Getting an upright on and off a tilter

[John Ross]

But you damaged the finish. :-)

----- Original Message ----- 
From: "Jon Page" <jonpage at comcast.net>
To: "pianotech list" <pianotech at ptg.org>
Sent: Monday, August 24, 2009 11:02 AM
Subject: [pianotech] Getting an upright on and off a tilter


I figured out a stress-free way to get the prongs of the
tilter under and removed from a low clearance piano.

A pry bar has the leverage to lift the piano easily. jpg attached.
-- 

Regards,

Jon Page