Bill said: "You may want to repin so you can check the condition of the pins. If they're rusty, lube will be a short lived solution." Bill, Usually, IMO, Lubing is simply putting off the inevitable need to re-pin. So, in that regard you are correct. However, since center pins are not Steel, your idea that a center pin could be "rusty" is very incorrect. They may have corrosion, but not rust.<G> Regards, Joe Joe Garrett, R.P.T. (Oregon) Captain, Tool Police Squares R I -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090817/3baa56a5/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC