Screw that, just buy the thickest bushing cloth (Pianotek sells it), cut your own strips, diameter of the hole x 3.14159... for the width will work fine. David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of William Monroe Sent: Wednesday, September 24, 2008 6:49 PM To: Pianotech List Subject: Double-Bushed Guide Rails I've never rebushed the S&S double bushed guide rail. I am wanting to keep it double bushed for hysterical accuracy. ;-] Any tips/procedures to help? I'm assuming standard bushing cloth works fine for the inner layer, but what should be used for the outer? I'd really appreciate input on this one. Thanks, William R. Monroe
This PTG archive page provided courtesy of Moy Piano Service, LLC