Thanks for the link ! <http://www.sizes.com/units/janka.htm> This is however hardness readings. I understand that hardness and density are sometimes closely related but it would good to know the density of the wood species. Obviously mahogany mouldings have deeper color than maple (if they are not stained) but is there any other good reason (other than looks) that different species are used as hammer mouldings ? Thanks PIANO LANCO Marc Lanthier 514-770-7438 1-877-PIANO10 info at pianolanco.com www.pianolanco.com <http://www.pianolanco.com/> _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of James H Frazee Sent: September 21, 2008 4:49 PM To: Pianotech List Subject: Re: Density of Hammer Mouldings Marc, Go here: http://www.sizes.com/units/janka.htm -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080921/7dd0416d/attachment.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 11582 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080921/7dd0416d/attachment.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC