Hi all This is my first post to the list... I have a question about techniques for propping open the lid of a piano with a side hinged lid. I tuned a Yamaha M1A the other day and couldn't figure out a good way to get the lid open high enough so that I could get my tuning hammer on the pins vertically. I tried flipping the lid all the way open but it hit the ceiling. And short of unscrewing the hinge from the lid of case I couldn't come up with anything. Any suggestions? Thanks, Paul Clement Certified Piano Technician GTAtuner at yahoo.ca | 416.903.1871 Piano Technician's Guild Associate Member -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080908/53138b28/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC