On 10/23/08, David Love <davidlovepianos at comcast.net> wrote: > I've found those older blocks don't > hold up that well and since replacing the block isn't that big a deal, I'd > probably do it. I'd be careful about hammer selection as the board is > likely much weaker than it was at the outset and may not tolerate as hard a > hammer as the original. I'm considering restringing w/pinblock (actually: pinblock - necessitating restringing) on a 1977 vintage C7. Should I consider "leaner" hammers for it, too? The thing does _NOT_ lack for volume. -- Conrad Hoffsommer, RPT Luther College Decorah, IA
This PTG archive page provided courtesy of Moy Piano Service, LLC