Al, I think that you have answered your own question. There is no need to replace them, as they are not loose, and will look better. Just turn them the smallest amount that lets you remove the old string, then pre-wind a coil on the new string. Scott Jackson Mt Keira, NSW, Australia. -----Original Message----- My question is, should I retain the old tuning pins to keep it visually consistent with the other tuning pins, or should I replace them with new pins. Tuning pin tightness across the piano is now equal, so there is no reason to change them from that standpoint. My concern is visual and value. Al Guecia -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20081012/b1a995bf/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC