> The C8 speaking length on this one is 2.5 inches. I > checked a few other pianos in the vicinity, including a S&S > D, and found 2 inches for no. 13 wire at C8. ------------------------------------------------------------- > I don't know if it is just too long a speaking length, or > too much string angle, or a combination. I only know it > doesn't work as is. > > Any suggestions? > > Greg Graham It's the speaking length. Changing wire gage, bearing angle, v bar profile, or anything else besides the speaking length isn't going to help unless you can come up with a higher test wire from somewhere. If you're using Roslau, try Mapes IG. It might make just enough difference. If it doesn't, it might be time to bow to the reality of the situation and realize that the thing was designed for string tensions beyond the capabilities of current available stock. Les, is your piano an S? Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC