Barbara: You're a love! I was looking for some classroom illustrations on this topic recently without having to do the work myself. :-) Thanks much, most helpful. Keep up the good work! Paul -----Original Message----- From: Barbara Richmond <piano57 at comcast.net> To: Pianotech List <pianotech at ptg.org> Sent: Tue, 27 May 2008 9:58 pm Subject: Centering jacks Hi, ? A while ago, someone was asking about centering jacks in the repetition lever (balancier) window.? I just finished repinning a set of wippens and while I was putting them back on the rail, I noticed a couple I had missed centering (another duty done while repinning). ? picture 1:? the off-center jack ? picture 2:? the block of wood under the wippen support on the side the jack needs to moved toward ? picture 3:? holding the parts in place ready for the hammer tap ? picture 4:? the hammer, ready to go ? Obviously, this set-up is for parts not attached to the rail--which also made it easier for taking pictures. ? Enjoy. ? Barbara Richmond, RPT near Peoria, IL ? ? ? ? ? ? [Image Removed] [Image Removed] [Image Removed] [Image Removed] -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080528/e1835a6b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC