Well the ones from Tuners Supply and Apsco were AOK, but I lost those, and bought a couple from Schaff. I found them nearly useless -- they didn't release with enough clearance for the typical upright flange screw head. I did complain to several of the Johnsons at past conventions' suppliers exhibits -- "Oh, really?" was their response!Maybe they've changed their specs -- I hope so! Joe Goss' screwholder is very good, but not completely idiot proof (screws can drop off if you're not careful). I own two. Patrick Draine On Fri, May 2, 2008 at 2:02 PM, Phil Frankenberg <philfrank56 at comcast.net> wrote: > I've lost my screw holder. It was the rigid shaft type purchased from > Schaff over thirty years ago. Before I order a new one, I'd appreciate any > recommendations any of you may have. > Thanks in advance. > > Phil Frankenberg > CSUChico > Chico, Ca. > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080502/768423f2/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC