re Split one piece bridge

[Farrell]

But how ya gonna drill them thar little holes up thar over by the ole strut 
w/ plate in place?

Terry Farrell

----- Original Message ----- 
> Two methods:
>
> 1. Overlap 3/8" pin block plugs. Trim installed plug before drilling 
> overlap :-)
>
> 2. Remove loose material in between pins. Fill gap with MarineTex paste 
> epoxy.
>      trim flush when cured, redrilll and renotch.
> -- 
>
> Regards,
>
> Jon Page
>