Hi Phil and others, The important thing to remember when doing test blows, is to not do it like a golfer ( lots of follow through ) but stop just before letoff. Now if I could just remember that <G> This reduces unnecessary strain on the joints. Also using the other hand every once in a while. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Phil Bondi" <phil at philbondi.com> To: <ilvey at sbcglobal.net>; "Pianotech List" <pianotech at ptg.org> Sent: Thursday, March 20, 2008 3:24 PM Subject: Re: for those on the fence about hearing protection.. > > > So why don't some of go ahead and come back to me about how Latin > > Pianists are no problem...;-] > > > I dealt with one 2 weeks ago from a band that will remain > nameless..and this particular 'pianist' wore tape on his > fingers. I think someone said the piano is a timbale?!? > > The following night that piano was used for another > show..let's just say the first tuning was FUN! > > Anyway, I'm the one who started this thread because I was > amazed at what I perceived as a moderate volume to tune > measured 84db..and my test blows averaged 114. Oh, and in > case I forgot to mention it the first time, I actually wind > up and smash the key..no..actually I use 2-3-4 fingers for > my test blow. I have read with interest all the replies from > this thread..2 things come to mind: > > My tunings do not go sharp over time. > Hammer technique, in my opinion, is just as important as a > good test blow. > > Your mileage may vary, but this is my experience down here. > > -Phil Bondi(Fl)
This PTG archive page provided courtesy of Moy Piano Service, LLC