Gordon, Don’t worry about the plate bushings, just be neat and take you time and allow the wicking capillary effect to do its job. You will understand after you get this one under your belt. Kindest Regards, Garret --- Garret Traylor - President High Point Piano & Music Inc. 88-PIANO (336) 887-4266 -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of downbeat237 at verizon.net Sent: Monday, June 09, 2008 11:21 PM To: pianotech at ptg.org Subject: Pin bushings with CA glue application List, I'm about to apply CA glue to tuning pins on a Wurlitzer spinet which has wood pin bushings. My first attempt at this procedure. I've got the piano tilted on it's back, using ZAP CA glue, and have read many posts on the procedure. Except, none have any discussion on should there be any concern with the wood pin bushings?. I'd appeciate a responce on this. Gordon Holley Goshen, IN Chap 467.
This PTG archive page provided courtesy of Moy Piano Service, LLC