Ted Make sure the damper upstop rail is adjusted properly. Willem (Wim) Blees, RPT Piano Tuner/Technician Honolulu, HI Author of The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: Ted Simmons <tsimmons4 at cfl.rr.com> To: Pianotech List <pianotech at ptg.org> Sent: Mon, 2 Jun 2008 10:50 am Subject: Double-striking hammers I have a Yamaha C3 that has several double-striking hammers. When I pull the action forward just a little (about 1/4 inch) the double-striking stops. I regulated this piano on my bench and this is the what I found after I reinstalled it. It worked fine on my bench. Any help would be appreciated.? Ted Simmons? -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080602/fff2b46a/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC