Yes-I agree From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Nick Gravagne Sent: Tuesday, July 29, 2008 12:14 PM To: 'Pianotech List' Subject: RE: Buckskin Jon, The thing with the punching! Very Clever! Send photos to Journal, they may wish to publish. Nick Gravagne, RPT Piano Technicians Guild Member Society Manufacturing Engineers Voice Mail 928-476-4143 _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jon Page Sent: Tuesday, July 29, 2008 7:58 AM To: pianotech at ptg.org Subject: Buckskin >If not, what clamping method can I use? jpgs attached of Ecsaine installation w/ PVC-E. Crimp the end to fit easily in slot of the butt (more force exerted in a vise than with pliers) Glue one end of the material, entire set Glue other ends, clamp butt w/ punching Trimmed catcher material (it's faster to trim than attempt to align material) -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080729/68f83976/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC